Clothing or Items with Heat Transferred or Sublimated Designs
Don't wash your items for 48hrs upon receiving them. Wash inside out with cold water for best results and avoid fabric softener. Hang to dry or tumble dry on the lowest heat setting if absolutely necessary. Do not apply heat directly to your design. With proper care your garment should last! If you have any issues with your item please make sure you’ve followed the care instructions properly. If you have any questions, feel free to reach out.
Masks
For best results, wash often, but avoid fabric softener and bleach. Hang to dry or tumble dry on the lowest heat setting. Do not apple heat to the design! It is advised to dispose of your mask after 20 washes by the manufacturer. The masks are made of soft 3-ply 100% cotton and are one size fits most.
Color Me! Designs
Have fun coloring your items with washable markers! For long-lasting, semi-permanent results use fabric markers or paints.
Tumblers, Water Bottles, Glasses, Mugs, Cups, etc.
Don't wash your items for 48hrs upon receiving them. Hand wash all items. Do not place in a dishwasher or microwave. Do not let it soak or sit in water for long periods. Avoid using abrasive sponges to clean the area where the design is. Sublimation & Vinyl Decals are made to last with proper care.
Wooden Signs & Designs
For the best results keep items dry & out of direct sunlight. If you wish to have a piece that can withstand the seasons, please notify me before creating your design as there are extra steps that need to be taken for the best, long-lasting results. Direct sun exposure or moisture can cause wood to lighten or even crack over time. Please be mindful when displaying your signs or plaques.
Paper Crafts, Flowers, Cork Board Plaques, etc.
Keep these items dry and out of direct sunlight. Be gentle with your designs, as they can be fragile.
Don't wash your items for 48hrs upon receiving them. Wash inside out with cold water for best results and avoid fabric softener. Hang to dry or tumble dry on the lowest heat setting if absolutely necessary. Do not apply heat directly to your design. With proper care your garment should last! If you have any issues with your item please make sure you’ve followed the care instructions properly. If you have any questions, feel free to reach out.
Masks
For best results, wash often, but avoid fabric softener and bleach. Hang to dry or tumble dry on the lowest heat setting. Do not apple heat to the design! It is advised to dispose of your mask after 20 washes by the manufacturer. The masks are made of soft 3-ply 100% cotton and are one size fits most.
Color Me! Designs
Have fun coloring your items with washable markers! For long-lasting, semi-permanent results use fabric markers or paints.
Tumblers, Water Bottles, Glasses, Mugs, Cups, etc.
Don't wash your items for 48hrs upon receiving them. Hand wash all items. Do not place in a dishwasher or microwave. Do not let it soak or sit in water for long periods. Avoid using abrasive sponges to clean the area where the design is. Sublimation & Vinyl Decals are made to last with proper care.
Wooden Signs & Designs
For the best results keep items dry & out of direct sunlight. If you wish to have a piece that can withstand the seasons, please notify me before creating your design as there are extra steps that need to be taken for the best, long-lasting results. Direct sun exposure or moisture can cause wood to lighten or even crack over time. Please be mindful when displaying your signs or plaques.
Paper Crafts, Flowers, Cork Board Plaques, etc.
Keep these items dry and out of direct sunlight. Be gentle with your designs, as they can be fragile.
Decal Application
For long-lasting applications please insure that your surface is clean of dirt, dust & debris. Rubbing Alcohol or Soap and Water is suggested to clean the surface. (Do NOT use Windex!)
Make sure you’re in a dry environment, free of moisture, wind, or any other element that could disrupt the application. 55° F or warmer is recommended for the best results!
Once your surface is ready, rub a squeegee or credit card on top of the clear transfer tape to make sure the design will properly adhere for applications.
Slowly peel the decal attached to the clear transfer tape off of the backing. If any piece remains, press the design back down onto the backing & reapply pressure with a squeegee or credit card until it removes completely off in one piece. Try to avoid touching the actual design with your fingers.
Slowly place the decal in place, once it adheres there most likely will not be easy removal or adjusting so take your time. Use your application tool to press it onto the surface with the clear transfer tape still attached. For best results, leave the transfer tape on for up to 24 hours if desired.
When you’re ready to remove the clear transfer tape, slowly peel it back at an angle. You do not want the design to pull up, if that happens repeat the previous step.
NOTE:
There are permanent & removable vinyl options available so please specify what surface you intend on placing your decal onto when ordering.
For long-lasting applications please insure that your surface is clean of dirt, dust & debris. Rubbing Alcohol or Soap and Water is suggested to clean the surface. (Do NOT use Windex!)
Make sure you’re in a dry environment, free of moisture, wind, or any other element that could disrupt the application. 55° F or warmer is recommended for the best results!
Once your surface is ready, rub a squeegee or credit card on top of the clear transfer tape to make sure the design will properly adhere for applications.
Slowly peel the decal attached to the clear transfer tape off of the backing. If any piece remains, press the design back down onto the backing & reapply pressure with a squeegee or credit card until it removes completely off in one piece. Try to avoid touching the actual design with your fingers.
Slowly place the decal in place, once it adheres there most likely will not be easy removal or adjusting so take your time. Use your application tool to press it onto the surface with the clear transfer tape still attached. For best results, leave the transfer tape on for up to 24 hours if desired.
When you’re ready to remove the clear transfer tape, slowly peel it back at an angle. You do not want the design to pull up, if that happens repeat the previous step.
NOTE:
There are permanent & removable vinyl options available so please specify what surface you intend on placing your decal onto when ordering.
